Playing PC games on the road has grown popular thanks to the Steam Deck, a portable gaming device. The primary distinction between the three Steam Deck models—64GB, 256GB, and 512GB—is the amount of storage capacity; these models range in price from $400 to $650. You will ultimately want additional storage for more games, though, regardless of the model you choose.
Valve said that upgrading the Steam Deck would be simple when it was originally shown. And it is, in fact. A Steam Deck’s storage capacity may be improved in a number of ways. Yes, a microSD card may be inserted into the Steam Deck’s card slot, however for a longer-lasting boost,
A new M.2 SSD, like the one found in the PS5, may be utilized for that.
A 64GB or 256GB disk may now be upgraded to 1TB for around the same price as a 512GB drive thanks to the drives’ declining pricing.
Despite not being the first portable gaming device, Valve’s Steam Deck was the first to have a PC-like environment with its several versions and simplicity of update. As game sizes continue to grow, storage is a particularly crucial element to enable upgrades.
You must disassemble it in order to upgrade. However, it’s not as difficult as it seems, so don’t be afraid.
We’ll guide you through the process of moving files and improving the Steam Deck’s storage.
What you require
A Phillips-head screwdriver #0 and an opening or prying tool are the two instruments needed to open a steam deck. A USB-C case for the SSD is quite helpful for a fast data transfer instead of having to start over with a new drive and redownload everything. The Corsair MP600 Mini 1TB SSD was utilized for this upgrade.
Visit Newegg to get the Corsair MP600 Mini 1TB SSD.
1. Getting the SSD ready
The MP600 should be placed within the USB enclosure. After installation, the SSD must be initialized. To accomplish this, right-click the Start button in Windows and choose Disk Management. When the USB enclosure is plugged into the computer, a notification stating that the drive has to be initialized will appear. To create a disk partition, use the GPT option.
2. File Transfer for Steam Decks
Connect the SSD to the Steam Deck once it has been initialized. In order to speed up file transfers, now is the time to remove any games that are currently on the Deck. After the storage has been increased, they can be downloaded again.
Navigate to Desktop mode on the Steam Deck and choose System > Konsole. You will be prompted for a password later on, so enter “passwd” when the Konsole window appears to put one up. This stage requires a simple password. Once a password has been created, type “sudo lsblk” and, when prompted, enter your password.
Among the Steam Deck drives described here are the main drive, usually identified as “nvme0n1,” and the USB drive, which appears as “sda.” Take a look at the storage size stated to verify the drive names. Both the SSD in the USB enclosure and the internal drive’s storage should be compatible.
After a notification indicating that the data transfer has started, all that is left to do is wait for it to finish, which might take up to 30 minutes, depending on how much internal storage there is.
3. Getting the Steam Deck Open
After transferring the data, reduce the Steam Deck’s battery life to less than 25% to prevent a potentially hazardous situation in the event that the battery is punctured. Next, confirm that the gadget is fully turned off and not only in sleep mode. Take out the eight screws, starting on the rear. The four screws in the middle of the back will be shorter than the four in the corners. Don’t forget to keep the screws tight.
A steam deck without its cover
What a steam deck’s interior looks like.
Oscar Gonzalez
Remove the screws and open the Deck using the prying tool. Where there is greater room to insert the tool, begin prying at the left and right triggers. Proceed around the Steam Deck until the rear is fully removed.
Purchase the iFixit Prying Tool on Amazon for $8.
4. The board shield is removed
When the Steam Deck is open, the metallic board shield is the first thing you’ll notice. Pull back the foil to expose a secret screw to remove it. Following the removal of the screw, The board will turn over. The battery and board are connected with a black ribbon at the bottom right. This ribbon should be carefully taken out of its slot.
behind its metal board screen, the interior of the steam deck
under the protection of the metal board.
Oscar Gonzalez
5. Replacing SSDs
The SSD with its ESD protection is located at the bottom of the exposed Steam Deck board. Slide the SSD out of its port after removing the screw keeping it in place. Place the new SSD on top of the ESD shielding after removing it. After that, insert the SSD into the port and tighten the screw.
A table with two SSDs and an open steam deck
It’s time to replace the SSDs.
6. Sealing the Steam Deck Off
It’s all about working backward from here. Close the board shield, reinsert the screw keeping it in place, and reattach the battery ribbon. Reinstall all of the screws and snap the Steam Deck case back together.
After the Steam Deck has been safely reassembled, turn it on and check the settings for the new storage space. That’s it.
Make sure the better ribbon is fully in place if the Steam Deck doesn’t power up. Make sure the SSD is firmly in its port and reopen the Steam Deck if it doesn’t boot up.